Beer Filtration
Filter Performance
Given the wide array of products available on the market, it is important to understand filter removal performance to ensure their effective and economical use in brewery applications. Common terms used to loosely define filter particle removal performance are nominal and absolute. These terms refer to the removal solely of particles and should not be used to describe filters used for bacteria and yeast removal. However, these terms are also extremely relative, and do not specify true particle removal performance.
Absolute
Absolute filters receive their name from the fact that the filtration is absolute since any particle that is larger than their pore size will be retained on the surface of the filters. Absolute filters have a specific rating of membrane efficiency independent of flow rate and pressure differential. This is a much more reliable means of assessing a filter for an application as its performance is more repeatable. Absolute ratings can only be applied to membrane filters (Section 15.5) due to the requirement of a definable pore.
Beta Ratio
Beta ratio is often used when expressing filter efficiency for a given particulate size. This, in simple terms, is the number of particles in the upstream (before filtration) divided by the number of particles downstream (after filtration). For example, if a 3-micron filter element has 5,000 particles upstream and allows 5 particles through its media, it’s beta-ratio would be calculated as 5,000 (upstream) ÷ 5 (downstream) = β1000. Beta ratios can also be expressed as an efficiency percentage.
Log Reduction Value
A log reduction value (LRV) is another term used for expressing filter efficiency at reducing yeast and bacteria. The log reduction value equals the number of organisms in the influent divided by the number of organisms in the effluent (filtrate). For example, if the number of colony-forming units (CFU) in the control was found to be 1,000,000 (or 106) and the end result using the product was only 1,000 (103), that would be a log reduction value of 3 or a reduction of 99.9 percent.
Click on the following topics for more information on beer filtration.
